BATTERY CABLE This is the best battery cable we have found. It is constructed with very fine strands of wire for flexibility and maximum power flow.This battery cable has insulation that is capable of surviving extreme temperatures and chemicals present in the automotive environment. The cable is available in 2-gauge red or 2-gauge black and is sold by the foot. Applications P/N Price Various 120201 - Red Cable $5.00 /ft Various 120301 - Black Cable $5.00 /ft Tech Tip: When remote mounting your battery, we recommend using ground cable from the negative post of the battery to the engine block. Copper is a much better conductor than rely- ing on a ground through the frame or body. The relative conductivity of copper at 20 degrees C is 89.5 compared to steel which is 15. TOP MOUNT BATTERY CABLE TERMINALS These top mount battery terminals have a satin silver finish. The top mount terminals allow battery cables to attach to top post batteries. The terminals are sold in pairs. Applications P/N Price Various 120501 $16.00 /pair SIDE MOUNT BATTERY CABLE TERMINALS These side mount battery cable terminals are machined from solid brass stock and have a satin nickel finish for optimum conductivity. Side mount terminals allow cables to attach to GM style side mount batteries. The kit includes nuts and lock washers for 5/16” studs. The long stud enables the use of multiple or thick cable end connectors. The connectors are sold in pairs. Applications P/N Price Various 120601 $20.00 /pair BATTERY BULKHEAD TERMINAL Use this bulkhead to safely pass a 12 volt power cable through a panel such as a firewall or floorpan. The terminal contains two 3/8”-16 threaded brass studs, and requires a 1-9/32” mounting hole. Applications P/N Price Various 120701 $20.00 CRIMP/SOLDER RINGS One piece copper crimp/solder rings for 2 gauge battery cable. The crimp ring has a 3/8” hole and includes heat shrink. The rings are sold in pairs. Applications P/N Price Various 120801 $ 10.00 /pair LED INDICATOR LIGHTS Use these small LED indicator lights in your custom dash insert for turn signals, high beams, or power indicators. They are available in two sizes and four colors. 5/32” round LEDs mount in a 0.156” hole. 1/4” round LEDs mount in a 0.250” hole. Choose from red, green, amber, or blue. Applications P/N Price DSE Dash Insert & Various 120901R - 5/32” Red $ 6.00 DSE Dash Insert & Various 120901G - 5/32” Green $ 6.00 DSE Dash Insert & Various 120901A - 5/32” Amber $ 6.00 DSE Dash Insert & Various 120901B - 5/32” Blue $ 12.00 DSE Dash Insert & Various 120902R - 1/4” Red $ 6.00 DSE Dash Insert & Various 120902G - 1/4” Green $ 6.00 DSE Dash Insert & Various 120902A - 1/4” Amber $ 6.00 DSE Dash Insert & Various 120902B - 1/4” Blue $ 12.00 ALL MODELS ELECTRICAL ALL MODELS ELECTRICAL ALL MODELS WWW.DETROITSPEED.COM WWW.DETROITSPEED.COM 17.0 17.0 110 110