The Caster Tuner kit includes: • Four #1, 1/8” offset caster tuners • Four #2, 1/4” offset caster tuners Applications P/N Price Camber Shim Track Kit - Front Frame 031714 $90.00 Caster Tuner Kit - Front Frame 031732 $65.00 DSE STAINLESS STEEL HEADERS The DSE Chevy II Stainless Steel Headers are designed and engineered for LS and SBC engines in the DSE Front Frame. Features: • 1 - 7/8” primary tubes for LS engines and 1 - 3/4” primary tubes for SBC engines with 4-way inline merge collectors • V-Band clamps • O2 sensor bung in the collector • Designed for performance, maximum ground clearance, and a clean engine compartment Note: Requires the use of a Chevy II LS or SBC engine mount kit. Note: Does not fit automatic transmissions. Applications P/N Price Chevy II Front Frame 061002 - LS 1 - 7/8” Tube Diameter $2350.00 Chevy II Front Frame 061003 - SBC 1 - 3/4” Tube Diameter - Standard Port $2350.00 3” Exhaust 060502 - 3” Mild Steel V-Band Clamp $ 55.00 3” Exhaust 060503 - 3” Stainless Steel V-Band Clamp $ 155.00 3” Exhaust 060501 - 3” Stainless Steel Exhaust Flange $ 20.00 Stainless Steel V-Band Clamp Exhaust Flange ers CAMBER SHIM TRACK & CASTER TUNER KITS Detroit Speed’s Camber Shim Track Kit allows you to adjust camber easily with our one-piece slotted camber shims. The Caster Tuners make adding more caster to your upper control arms easy. The “1” Caster Tuners have a 1/8” offset and the “2” caster tuners have a 1/4” offset. The Camber Shim kit includes: • Four 1/16” shims • Four 1/8” shims • Two 1/4” shims With Vibration Reducing U-Joint Plain Steel Polished Stainless Steel Application P/N Price P/N Price 3/4” - 36: ididit steering column 092524 $180.00 092524P $295.00 STEERING COUPLER WITH VIBRATION REDUCING U-JOINT 1962-1967 CHEVY II STEERING COUPLER Use this Steering Coupler Kit with the DSE Chevy II Front Frame. It utilizes highest quality steel and is thoroughly tested. • Shaft is 12” in length DD, and easily trimmed to exact length • Available with vibration reducers (DSE recommended) and also increases overall life of steering components • Available in plain steel or polished stainless steel for many different column applications Note: On stock steering columns, verify output shaft type and spline before ordering. Please call with any questions. Camber Shim Track Kit - Bolt Spread P/N: 031714 6.5” CHEVY II FRONT SUSPENSION 1962-1967 CHEVY II FRONT SUSPENSION 1962-1967 CHEVY II WWW.DETROITSPEED.COM WWW.DETROITSPEED.COM 17.0 17.0 60 60