LS Tank shown Applications P/N Price 1962-1967 Chevy II 080119 - Carbureted $ 875.00 1962-1967 Chevy II 080120 - L98, LT1 $1225.00 1962-1967 Chevy II 080121 - Fuel Injected - LS $1270.00 STAINLESS STEEL NARROWED FUEL TANKS Our stainless steel narrowed fuel tanks are designed specifically for use with our mini-tub kit. Our DSE tanks have an angled front corner to allow for easier exhaust packaging.These are a direct bolt-in using the original mounting location and stainless steel fuel tank straps are provided.They are available for fuel injected or carbureted engines. All carbureted tanks have a 1/2” NPT fuel pick-up fitting compatible with either - 8 AN or -10 AN fuel line.The DSE LT1 pump provides 45-48 psi at 33 gal/hr.The DSE LS1 fuel pumps use a Walbro GSS340 electric in-tank pump that delivers 60-65 psi @ 55 gal/hr (at 13.5 volts). All tanks are baffled and pressure tested. 0-90 ohm fuel sending units for Chevy II’s are soldseparately. Note: Additional fuel pump upgrades available. SUPER TANK 600 & 1000 SERIES STAINLESS STEEL NARROWED FUEL TANK The DetroitSpeed 600 series tank is specifically designedfor vehicles with 600 HP that are using an internalfuel pumpfor track purposes.The DetroitSpeed 1000 seriesfuel tank is specifically designedfor vehicles with 1000 HP using a dual internalfuel pump system with an electronic controller. Both tanks include a jumper har- nessfor easy installation and have corner pickups built into the tank to eliminate the possibility offuel starvation during extreme cornering without having afull tank. Applications P/N Price 1962-1967 Chevy II - “600 Series” 080144 $1800.00 1962-1967 Chevy II - “1000 Series” 080145 $2760.00 FUEL TANK ACCESSORIES Use the sending unit with our narrowed fuel tanks. The sending unit is set up for GM and aftermarket gauges 0-90 ohm. The II Much Fuel Vent eliminates spillage at the track and fuel odors in the garage. Typically installed on pre-emission or modified performance cars it’s an attractive upgrade that elegantly solves a common problem whether you’re at the car show or the racetrack. Featuring hard anodized 6061 aluminum, 40 Micron filtration, and an engineered environmental seal, the II Much Fabrication Fuel vent looks as good as it performs. Installation is simple, requiring only one hole drilled in the trunk floor and a single hose to the tank. The Fuel Pump Access Panel can be welded into your trunk to allow quick and easy access to your fuel pump. Applications P/N Price DSE Narrowed Fuel Tanks 080201 - Sending Unit $ 50.00 DSE Narrowed Fuel Tanks 080401 - II Much Fuel Vent $290.00 Various 080402 - Fuel Pump Access Panel $ 90.00 CHEVY II 1962-1967 CHEVY II FUEL SYSTEM 1962-1967 CHEVY II FUEL SYSTEM WWW.DETROITSPEED.COM WWW.DETROITSPEED.COM 17.0 17.0 65 65