 |
 |
 |
 |
 |
|
|||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
|
||||||||||||||
|
QUADRA LINK KIT
This is a
great way to upgrade from original leaf spring
suspension. Unlike our competitors, DSE's exclusive new
4-link geometry design is uncompromised to achieve the
best possible handling. The new DSE "Swivel-Link"
(Patent Pending) allows the suspension to fully
articulate with smooth solid motion an no binding. The
best feature is that this is achieved without heim-joints. Heim-joints are noisy and prone to
short-term life. The DSE QUADRA Link utilizes tuned
high-durometer rubber bushings (in place of heim joints
or squeaky urethane bushings). The long upper links
provide great pinion and u-joint angle control. Contrary
to competitors' kits, our kit utilizes a panhard rod
that provides precise and effective rear axle lateral
location during hard cornering. The panhard rod is
adjustable as ride height changes for roll center
control. The rear upper shock crossmember strengthens
the rear body and frame section. Don't settle for
anything less than DSE's QUADRA Link rear suspension! - No
compromises in suspension geometry - great technology during hard cornering We utilize Koni aluminum body rebound adjustable coilover shocks and specifically designed coilover springs for the QUADRA Link. This gives you a wide range of ride height adjustment. |
|||||||||||||
|
||||||||||||||
 \
|
OPTIONAL REAR AXLES DSE can also provide you with a new Ford 9" or GM 12
bolt housing and weld the axle brackets onto the OPTIONAL FORD 9" REAR AXLE HOUSING • Heavy duty
round back housing, TIG welded, 3" x • QUADRA Link brackets welded to housing • Billet Torino ends • Ships UPS • Fill and drain plugs optional
OPTIONAL FORD 9" COMPLETE REAR AXLE • Heavy duty
round back housing, TIG welded, 3" x • Up to 500 hp • QUADRA Link brackets welded to housing • Billet Torino ends and axle vent • Ready to assemble - ships UPS • Fully assembled - must ship freight • Fill and drain plugs optional
OPTIONAL GM 12 BOLT COMPLETE REAR AXLE • USA cast, TIG welded, 3" x .250" tube, Truetrac, 30-spline
axles, 1350 yoke, ½" studs, narrowed • Up to 500 hp • QUADRA Link brackets welded to housing • Billet Torino ends and axle vent • Fully assembled – must ship freight
Note: Axle housing can be powdercoated in either gloss or satin black.
|
|||||||||||||
|
||||||||||||||
| FORD 9" UPGRADE OPTIONS | ||||||||||||||
|
||||||||||||||
|
||||||||||||||
| GM 12 BOLT UPGRADE OPTIONS | ||||||||||||||
|
||||||||||||||
| POWDERCOAT OPTIONS | ||||||||||||||
|
||||||||||||||
|
|
||||||||||||||
