C2 Electric Headlight Door Kit - (1963-67 Corvette)
Press and move to zoom.
Mouse over image to zoom.

C2 Electric Headlight Door Kit - (1963-67 Corvette)

Product Code: 122008

The Detroit Speed, Inc. Electric Headlight Door Kit replaces the stock electric actuated system on all 1963-67 Corvettes. When installed, this kit operates the headlight doors more reliably, smoother and in synch than stock.

The C2 Electric Headlight Kit uses current sensing technology to provide a system that needs no adjustment and is extremely safe. Detroit Speed has gone to great lengths to provide you with the highest quality, best engineered product available with the easiest installation with no permanent modification to your classic Corvette. This allows owners the option to return their vehicle back to its original configuration if desired, leaving no holes or spliced wires behind. Once installed, you will no longer need to operate the headlamp doors separately with the problematic factory momentary switch, the control module will automatically actuate them when the headlamps are turned on/off. The kit comes complete with everything you need for installation including two electric actuators, a control module, harness, mounting brackets, and hardware.



(Based on 1 vote(s))
1 review(s) | Add your review!
USD $575.00
Retail price: USD $575.00
This kit contains:
  • Box 10x10x6 (x 1)
  • Headlight Door Actuator Module Assembly, C2 Corvette (x 1)
  • Headlight Kit Harness Bag - 1963-67 Corvette (x 1)
  • Headlight Actuator Assembly - RH - 1963-67 Corvette (x 1)
  • Headlight Actuator Assembly - LH - 1963-67 Corvette (x 1)
  • Package (x 0)
Average Rating:
(Based on 1 vote(s))
Rate this product:
Fred N. From United States
Nice upgrade
August 6, 2019
I bought these from a local distributor, but Detroit Speed was very helpful in directing me to them. The product installed with one minor issue and I hope a simple installation instructions change can help the next customer. The change would be to have the electrical connector plugged into the motors before you mount them. I had to pull the motors back out because there was not enough room to get past the original wiring harness to connect the new wiring harness after the motors were mounted. Otherwise the installation took me about 5 hours. The new motors are very sensitive to a 12V+ electrical flow. I had to start my 1964 before they would open fully. They closed without any issue, but opening was another story. Still much nicer than my old motors. Looking forward to getting my car back out and not worrying if I stay out until after dark.
7 of 7 people found this review helpful.
Was this review helpful to you? (7) (0)