Power Steering Pump - Aluminum Without Reservoir (AN Fittings Installed)
Press and move to zoom.
Mouse over image to zoom.

Power Steering Pump - Aluminum Without Reservoir (AN Fittings Installed)

Product Code: 090301

Detroit Speed's power steering pumps are compatible with any power steering gear or rack and pinion. All pumps are completely new and are not remanufactured. Detroit Speed pumps deliver constant flow under given operating pressures. The transverse bearing compact pumps (TC pumps) are less sensitive to radial belt loading than other types of pumps.

Detroit Speed power steering pump specifications:

• Flow = 3.0-3.4 gallons per minute at 1500 rpm
• Pressure relief = 1250-1450 psi
• TC pumps offer high efficiency and quite operation
• All Detroit Speed pumps are compatible with Vintage Air's Front Runner accessory drive system
• Feature a 0.665" shaft diameter
• All pumps, including those with an integral reservoir, fit within the Front Runner confines
• All pumps are available with Mustang II flow control valve. This flow control fitting will restrict the flow to approximately 2 gal/min while retaining the
appropriate pressure in the system

This pump should be used with a remote reservoir. The aluminum housing is machined for -6 and -10 AN fittings, which are included.

Tech Tip: Pulleys must be installed with proper power steering pulley installation tool; KD Tool #2897. DO NOT USE A HYDRAULIC PRESS!

USD $294.95
Retail price: USD $294.95
Average Rating:
Rate this product: