SpeedRay™ Front Suspension Kit - (1963-82 Corvette - Base Shocks - Bolt-In Coilover Mounts - SBC / LS)
Press and move to zoom.
Mouse over image to zoom.

SpeedRay™ Front Suspension Kit - (1963-82 Corvette - Base Shocks - Bolt-In Coilover Mounts - SBC / LS)

Product Code: 032072

The new Detroit Speed, Inc. C2/C3 SPEEDRAY™ front suspension has no compromises and exclusive Detroit Speed suspension geometry for superior handling and ride quality. It is available as a 100% bolt-on system or with a small amount of fabrication for a competition coilover option that allows faster spring changes. The system features ‘Detroit Tuned’ quick ratio power rack and pinion steering along with forged in the USA Detroit Speed aluminum uprights. The bolt-on powder coated cradle assembly improves suspension geometry, provides rigid mounting for the rack and pinion, and includes integrated tie down eyelets. DSE/JRi ‘Detroit Tuned’ Coilover shocks/springs allow for spring rate tuning and ride height adjustment. It also includes a splined sway bar with aluminum arms, composite bushings, powder coated tubular upper and lower control arms with Delrin™ bushings, forged offset upper control arm mounting brackets with caster tuner bushings to optimize suspension geometry and provide clearance for Gen V LT4 engines. The kit also includes Torrington bearings and a spanner tool for easy spring height adjustments. The body and engine do not need to be removed for installation of the SPEEDRAY™ front suspension.

Base Shock:

The DSE/JRi ‘Detroit Tuned’ base shock is a ‘pure blood pedigree’ racing shock in its most efficient form as a non-adjustable unit. Although
non-adjustable, it shares all the increased dynamic responses of all the JRi adjustable models while providing excellent ride quality on the street.

Spring Rate: 550lbs/in
Spring Free Length: 8in


Note: For competition applications, the Detroit Speed rack & pinion fluid transfer conversion kit will replace the hardlines on your Detroit Speed rack & pinion using -4 AN steel fittings. The hoses are Teflon lined to handle the high pressure demands of the steering system and come with pre-crimped stainless steel fittings to attach to the -4 AN fittings. See upgrades below.

Note: Please follow this link for Ididit steering column options - Retrofit Corvette Columns


USD $5,900.00
This kit contains:
  • Coilover Shock - Non-Adjustable (Each) C2 / C3 DSE Front Suspension (Bolt-In Version) (x 2)
  • C2 / C3 Front Suspension Box 1 (Cradle, ARB Arms, Assoc. Hardware Kits) (x 1)
  • C2 / C3 Lower Control Arms (pair) and LCA Hardware Kit (x 1)
  • C2 / C3 Upper Control Arms (pair) and UCA Hardware Kit (x 1)
  • C2 / C3 Front Suspension Upright Assemblies (pair) (x 1)
  • C2 / C3 Front Suspension Bolt-In Version Box 2 (R&P, ARB, Cradle Adapter Plates, C / O Mt. Kit, Hdwr.) (x 1)
  • 8" Front Coilover Springs (Pair) - (X-Gen 595 - 550lb / in Spring Rate) (x 1)

Total Suspension Travel
6”

Ride Height*

7.6” ±1.0”

Static Camber

-0.5° ±.2°

Static Caster

7.5° ±.5°

Static Toe
0° ±.1°

Steering Ratio

13:1

Steering Wheel Turns Lock to Lock
2

Max Turning Angle (Outside wheel)

27.5°

Ackerman Angle (Full turn)
5.2

Total Bump Steer (20” toe span)

.039"


*Measured from bottom of DSE front cradle to center of hub.
Average Rating:
Rate this product: