Rear Coilover Conversion Kit - (2016+ Camaro - Single Adjustable Shocks)

Product Code: 042432

The Detroit Speed, Inc. 2016+ Camaro Rear Coilover Conversion Kit is a direct bolt-on assembly that completely replaces the OEM rear strut assembly. This kit includes helper springs and spring dividers if you choose to run a low ride height along with all necessary hardware. The kit uses a DSE/JRi all aluminum shock with "Detroit Tuned" valving. The kit allows ride height adjustment and easy rear spring changes.

Spring Rate: 500lbs/in
Spring Free Length: 10in

Note: Detroit Speed recommends using the magnetic ride control shock simulator kit from X-ineering Electronics. Visit their site at www.xineering.com.

Note: The Detroit Speed Rear Coilover Kit allows you to lower the factory ride height by 1-1/2” or more from the factory ride height. If you choose to lower your Camaro by this amount, Detroit Speed recommends using the provided helper springs and spring dividers. If you plan on lowering your ride height by 1” or less, the helper springs and spring dividers are not necessary. The purpose of the helper springs, is to prevent the coilover springs from losing its pre-load when the suspension is in full droop, such as when you raise the vehicle on jack stands and the rear suspension is hanging all the way down until the shocks reach full extension.

(Based on 8 vote(s))

1 review(s) | Add your review!

USD $2,050.00
Retail price: USD $2,050.00

Rear Coilover Conversion Kit - (2016+ Camaro - Double Adjustable Shocks)

This kit contains:

Shock Spanner Tool (x 1)
Rear Shock Upper Mount Assembly RH, 6th Gen Camaro Coilover Kit (x 1)
Rear Shock Upper Mount Assembly LH, 6th Gen Camaro Coilover Kit (x 1)
Rear Coilover Hardware Kit, 6th Gen Camaro (x 1)
Steel Bushing 1 / 2 ID x 3 / 4 OD x 5 / 8 L Yellow Zinc (x 2)
Rear Lower Shock Tapered Spacer, 6th Gen Camaro (x 4)
Rear Coilover Shock, Single Adjustable - 2016+ Camaro (x 2)
Torrington Bearing Set (Pair) - (2-1 / 2" I.D. Coilover Springs) (x 1)
Helper Spring - 2.5"ID x 4"FL x 25# (x 2)
Stacked Spring Divider - 2.5" ID (x 2)
Detroit Speed Replacement Coilover Springs - (10"x2.5" I.D. - 500lb / in - Pair) (x 1)
Instruction - 2016+ Camaro Rear Coilover Conversion Kit (x 1)
Box 22x14x6 (x 1)
Made in the USA, Large Decal - 2x3 (x 1)
Package (x 0)