Chevrolet C10 - 1973-1987
The Chevrolet C10 is the most iconic truck of all time. Everyone has their favorite generation of C10s thanks to each generation having timeless designs that are uniquely distinct from each other. Whether you prefer the curves of the mid 60s trucks or the iconic square body of the 70s and 80s, Detroit Speed's products can not only give your truck the stance it deserves, but also the handling prowess to back up the look.
DSE Speed Kit 2 - Front
- Detroit Speed (DSE) Front Speed Kit 2 - Front suspension with swaybar for 1973-1987 Chevrolet/GMC C10/C15 2WD trucks
- Improve the handling and performance of your truck while lowering the front ride height by 4.50-inches for an aggressive look
- 100% bolt-on for a quick and easy installation in your garage
- 2.50-inch drop spindle assembly includes made in USA DSE forged aluminum uprights with forged steel steering arms for strength and durability
- Modern GMT800 (1999-2006 Silverado) truck hub pack, wheel bearings with dual bolt pattern (5x5" or 5x4.75"), means no more packing messy wheel bearings
- 2.00-inch drop coil springs and shocks for improved ride and handling
- Designed to use the GMT800 brake calipers, brackets, and pads (requires DSE 13.00-inch dual drilled rotors) – Also allows aftermarket brake options
- 1-7/16-inch diameter sway bar – Hollow tube design with .188 inch wall – 127% stiffer than factory sway bar
- Includes: Spindles, shocks, springs, sway bar, upper and lower ball joints, inner and outer tie rod ends with adjustment sleeves
DSE Quadralink Rear Suspension
- Adjustable ride height from 5” to 7.5” of drop to set the perfect stance
- Improved ride quality and stance for daily driving and light-duty hauling
- Powder-coated, 4-link rear suspension with trackbar for good looks and corrosion protection
- Includes adjustable Detroit Speed Swivel-Links™, Coilover shocks and springs, installation hardware, and C-Notch cut template for easy ride height adjustments
- With the Swivel-Links™, pinion angle and/or wheelbase can be adjusted without unbolting the link from the truck
- Laser-cut brackets compatible with original axle, wiring, and brake lines for an easy installation
- Adjustable upper shock mount relocates 1” up or down from nominal, allowing for a change in ride height without affecting shock travel
- C-Notch plate creates additional axle clearance at lower ride heights
- 100% bolt-on for a quick and easy installation
- Includes non-adjustable shock for a smooth ride
DSE Speed Kit 3 - Rear
- Lowers the rear ride height 6-8 inches for an aggressive look
- All parts are manufactured from high strength 3/16 or 1/4 inch steel and powdercoated black for strength and durability
- The flip kit features two leaf spring pinhole locations for adjustability in centering up the rear axle
- C-Notch provides proper axle to frame clearance
- Hangers and Shackles have two spring mounting options one inch apart for more adjustability of the stance
- 100% bolt-on for a quick and easy installation
- Includes new non-adjustable shock for a comfortable ride
Back To Top