Detroit Speed DECAlink™ Rear Suspension Kit - Double Adjustable Remote Shocks - 17 Spline Axles - 400hp
1963-1982 Chevrolet Corvette
Part # 041740-DRDS
Estimated Ship Date: 01/23/2023
Notify Me When AvailableStarting at $898 a month with Learn More
The DECAlink™ Independent Rear Suspension features no compromises and exclusive Detroit Speed suspension geometry for superior handling and ride quality. The IRS utilizes modern CV axle shafts and hub bearings, keeping suspension loads from being transmitted through the axle shafts. The DECAlink™ IRS works with an original 17-spline differential assembly or a Hammerhead 12-bolt differential. No body modifications are required on 1968-79 models while the suspension is offset inboard for additional tire clearance. All suspension link lengths are adjustable and the kit has adjustments for rear anti-squat geometry and roll center height. The suspension points are hard mounted to eliminate stock rubber mounted suspension deflection. It comes with forged in the USA Detroit Speed aluminum uprights and a two-piece cast aluminum/steel cradle assembly which eases differential housing removal. DSE/JRi "Detroit Tuned" Coilover shocks/springs allow spring rate tuning and ride height adjustments. The kit includes a rear anti-roll bar and uses OEM cross-axis pivot bushings at all pivot points. The kit also includes Torrington bearings and a spanner tool for easy spring height adjustments. Remote Canister Monotube Double Adjustable Shock This DSE/JRi shock has all of the qualities of the double adjustable shock and incorporates a gas charged bladder to provide high frequency and low speed dampening control. Remote Canister Shock Mounts. These billet aluminum black anodized shock mounts are manufactured for securing your remote shock canisters to the vehicle. The shocks mount with two 10"-24 x 1/4" buttonhead screws. Rear Spring Rate: 550lbs/in Rear Spring Free Length: 8in The axle shafts are rated to 600Hp, and the factory 17-spline differential is recommended to only 400Hp. Upgrade to Part # 041741DS for the DSE 30-spline differential if you have 400 to 600Hp. Upgrade to Part # 041742DS if you have more than 600Hp.
- Detroit Speed aluminum uprights - forged in the USA
- Cast Aluminum & Steel Cradle Assembly
- "Detroit Tuned" coilover shocks
- Coilover springs
- Rear sway bar
- Torrington bearings
|Horsepower Rating (HP)||400|
|Product Type||Decalink Kit|
|Ride Height||3" +/-1.0"|
|Shock Type||Double Adjustable Remote|
|Static Camber||-0.3° +/-.2°|
|Static Toe||0° +/-.1°|
|Total Suspension Travel||6"|
|California Proposition 65 Required||Yes|
This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Be the first to write a review
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.