X-Gen 535 Front Suspension Module - (Powdercoated Components - Double Adjustable Shocks - GM 5x4.75" Bolt Pattern)
Press and move to zoom.
Mouse over image to zoom.

X-Gen 535 Front Suspension Module - (Powdercoated Components - Double Adjustable Shocks - GM 5x4.75" Bolt Pattern)

Product Code: 032043-D

Detroit Speed’s X-Gen series of front suspension systems allow you to integrate Detroit Speed suspension technology into any vehicle. This complete suspension module is available with a 53.5" track width and is ready to be subbed into your application with the 2” x 4” rail sections. These are the same suspension systems found in Detroit Speed’s bolt-in front frames so they have been designed, engineered, and developed to provide the ultimate in performance on both the road and the track.

• Detroit Speed exclusive suspension geometry for superior ride and handling
• OEM quality stamped crossmembers for improved structural rigidity
• Tubular upper and lower control arms
• ‘Detroit Tuned’ aluminum body coilover shocks
• Torrington Bearings
• ‘Detroit Tuned’ power rack and pinion steering
• Caster tuner bushings which allow independent caster/camber adjustments
• Integrated splined sway bar
• Spanner Tool for easy shock adjustments

X-Gen 535 Specifications:
Track Width (Hub to Hub): 53.5"
Maximum Wheel Backspacing: 5"
Total Suspension Travel: 6"
Framerail Dimensions: 2" x 4" x .120 w
Outer to Outer Frame width: 30.5"
Framerail Length: 24.75"
Distance from Rear of Framerail to Susp. Axis: 12.25"
Nominal Ride Height: 1.5" *Measured from the top of the framerail to the center of the hub

Double Adjustable Shock:
This is the most race winning shock JRi has in its stable. With its two independent adjustments and the enormous range of adjustment it can be set to the exacting demands of the driver and performance levels required while providing excellent ride quality on the street.

NOTE: X-Gen series frame must ship freight

NOTE: Does not include coilover springs, spring rates and sizes vary depending on vehicle.

Note: For competition applications, the Detroit Speed rack & pinion fluid transfer conversion kit will replace the hardlines on your Detroit Speed rack & pinion using -4 AN steel fittings. The hoses are Teflon lined to handle the high pressure demands of the steering system and come with pre-crimped stainless steel fittings to attach to the -4 AN fittings. See upgrades below.

USD $7,799.95
Retail price: USD $7,799.95
This kit contains:
  • Coilover Shock - Double Adjustable (x 2)
  • 21.5" Detroit Tuned Power Rack & Pinion - (Detroit Speed Aluma-Frame / Chevy II Front Frame) (x 1)
  • Front Frame Assembly, Bare - X-Gen 535 (x 1)
  • Lower Control Arms (Pair) - Chevy II Front Frame (Gloss Black) (x 1)
  • Upper Control Arms (Pair) - Chevy II Front Frame (Gloss Black) (x 1)
  • Sway Bar, Arms (Satin Black), Hardware Kits, Instructions - X-Gen 535 (x 1)
  • Upright Assemblies GM W / 5 on 4-3 / 4 Bolt Pattern (x 1)
  • Pallet 76x48 (x 1)
  • Package (x 0)
Average Rating:
Rate this product:

You may also be interested in